Easy Ride Height Setup in Four Simple Steps

1. Turn on Sensors

Click the grey POWER button once to turn on each sensor. The LED will flash indicating it is powered on.

2. Open CHMS App

Turn on the tablet and open the Creative Racing CHMS App pre-installed on the tablet. 

3. Position Sensors

Place the sensors under the chassis where you want to measure. If scales are used, use a straight edge to zero from the top of the scale pads with three clicks of the grey button.

4. Measure Ride Heights

Tap TAKE READING on your CHMS tablet and your ride heights will appear.

PRODUCTS

Chassis Height Measuring System

Measure chassis heights, quickly, accurately, and wirelessly; and ensure your ride heights are optimized to your chassis builders specifications.

$1200

1.25" - 1.5" Tubing Mounts

Ensure your measurement surfaces are always level on any tube frame chassis. Customize your CHMS setup with mounts available for both 1.25" and 1.5" tubing.

Torsion Bar Mounts

Customize your CHMS setup and combine both torsion bar and chassis frame attachment points. Sensors are universally adaptable with magnetic bases.

$100

Panhard Bar Mounts

Customize your CHMS setup and combine both panhard bar and chassis frame attachment points. Senors are universally adaptable with magnetic bases.

$100

NEWS